Because the outer cover itself is not allowed to have defects such as tiny convex hulls, pits, small wrinkles, cracks, etc., this kind of parts requires high surface quality and good profile dimensional accuracy. Therefore, mold surface processing should be guaranteed from two aspects: smoothness...

The CNC machining of mechanical parts is composed of basic surfaces such as plane, outer cylindrical surface, inner cylindrical surface or curved surface, and forming surface due to various structural shapes. Each surface has a variety of processing methods. When selecting

1. The tool used in the inspection should conform to the specifications allowed by the machine tool. 2. The maximum tool length, maximum tool weight, and total tool weight do not exceed the specified value. 3. The Dongguan CNC processing manufacturer

Introduction to Five-axis CNC Machining. CNC Machining, also known as computer gongs, CNCCH or CNC machine tools, is actually a kind of name in Hong Kong. Later, it was introduced into the Pearl River Delta of the mainland and it was actually

1. Both CNC engraving processing and CNC milling processing adopt the milling processing principle. The main difference lies in the diameter of the tool used. Among them, the commonly used tool diameter for CNC milling is 6-40 mm, while the tool diameter for CNC engraving is 0.2-3 mm.